Please Scroll Down to see Community
napsgear
UGL OZ
domestic-supply
puritysourcelabs
YOURMUSCLESHOP
UGFREAK
napsgearUGL OZ domestic-supplypuritysourcelabsYOURMUSCLESHOPUGFREAK

Diamond Supplier UGL OZ - Aussie Domestic Source (Updates & Reviews)

This is a thread approved and checked. Fully trusted Diamond Vendor UGL OZ. 15 years! Trusted in Aussie community. Trusted and approved by the Anabolex family.
Hey all,

Please see the results of our latest batch of Janoshik test results below (reports prepared: September 16 2025):

OILS:
ORALS (3 random caps per pack tested):
The oil samples tested well and happy to see that there was a vast improvement on the latest batch of EQ. There is definitely room for improvement to tighten up the dosing on a few of the orals tested - the necessary adjustments will be made on the next batches for these as we'd like to get these pushed into the deep 90s (obviously as close as possible to 100% as we can get!). The variance on one of the Viagra samples also brought the overall average down so that's something we'll keep an eye on.

The Telmisartan needs to be dialled back a tad as all 3 samples tested at an overdosed level that is outside of our acceptable margin of allowance. The Telmi raws are surprisingly tricky to work with, they're a consistency we're not quite used to and it was our first time working with them but this gives us the necessary insights needed to improve on the next batch we produce.

There's been a couple requests made for some more peptides tested (such as the Semaglutide) so we'll be sending off another round of samples off to Jano with a few other items in the next week or two and will post those results as soon as we get them back too.

Previous Janoshik results posted:
As always, all feedback is welcome and encouraged so feel free to drop a post in this thread or shoot us an email: [email protected]

AJ
 
UGL OZ said:
Hey all,

Please see the results of our latest batch of Janoshik test results below (reports prepared: September 16 2025):

OILS:
ORALS (3 random caps per pack tested):
The oil samples tested well and happy to see that there was a vast improvement on the latest batch of EQ. There is definitely room for improvement to tighten up the dosing on a few of the orals tested - the necessary adjustments will be made on the next batches for these as we'd like to get these pushed into the deep 90s (obviously as close as possible to 100% as we can get!). The variance on one of the Viagra samples also brought the overall average down so that's something we'll keep an eye on.

The Telmisartan needs to be dialled back a tad as all 3 samples tested at an overdosed level that is outside of our acceptable margin of allowance. The Telmi raws are surprisingly tricky to work with, they're a consistency we're not quite used to and it was our first time working with them but this gives us the necessary insights needed to improve on the next batch we produce.

There's been a couple requests made for some more peptides tested (such as the Semaglutide) so we'll be sending off another round of samples off to Jano with a few other items in the next week or two and will post those results as soon as we get them back too.

Previous Janoshik results posted:
As always, all feedback is welcome and encouraged so feel free to drop a post in this thread or shoot us an email: [email protected]

AJ
Click to expand...
For those interested in capsule variances, I explained this to someone who'd asked about this on another board so I figured I'd post here too as there'd be some of you wondering the same or would find value in the explanation.

Question: "That's really interesting. Is the cause of larger variances due to the raws not being the concentration advertised or the manufacturing process needing adjustment?"

Response:

Variability between different batches could be the cause the differences in raw purity, variances between same batches can be the result of the size of the batch being made - bigger batches require longer mixing times to ensure there is even distribution between the active ingredient and filler, and of course execution: ensuring that an adequate amount of mix is being squeezed into the caps prior to the caps enclosure.

Variances are to be expected between capsules but ideally kept within a tight of margin as possible. In fact, even in pharmaceutical applications there is regulatory allowance with an acceptable range set within ±5% of the active ingredient.

This also isn't an automated process - we use manual capping machines, Here's what the process looks like if you're not familiar: Capping Process Demonstration

Using a 400 or 600 board and pumping out 10s of thousands - if not 100,000+ caps - per sitting is a labour intensive and tedious task as you can imagine, especially when working with smaller caps (we use size 5 as standard, but size 4 for some of the higher dose offerings or raws which are a little harder to work with, for example we stick with the size 4s for the Anadrol (which tested well in our recent HPLC results)).

One thing to note that this is simply 3 randomly selected caps in packs of 100. One cap that didn't get filled quite enough can bring the overall average down. Also a difference in 1mg in a 10mg cap produces a 10% variance which appears more extreme than it actually is when broken down into a %. To put this further into perspective, 10mg is 1/500th of a teaspoon - 1mg is 1/5000th of a teaspoon. Variances are naturally going to occur at this scale.

It'd be interesting to see the statistics of testing an entire 100 pack and see how big of a variance there is between the entire 100 - that's something I'll likely do in the near future as it'd be interesting to see that data :)

But to answer your question: increased mixing time, smaller controlled batches to ensure even filler:compound distribution, and ensuring that each capsule is filled to capacity prior to enclosure would yield improvements. Overdosing may also be necessary too if raw purity isn't where it needs to be but would require the raws to be independently tested prior to batches being made too.

AJ
 
UGL OZ said:
For those interested in capsule variances, I explained this to someone who'd asked about this on another board so I figured I'd post here too as there'd be some of you wondering the same or would find value in the explanation.

Question: "That's really interesting. Is the cause of larger variances due to the raws not being the concentration advertised or the manufacturing process needing adjustment?"

Response:

Variability between different batches could be the cause the differences in raw purity, variances between same batches can be the result of the size of the batch being made - bigger batches require longer mixing times to ensure there is even distribution between the active ingredient and filler, and of course execution: ensuring that an adequate amount of mix is being squeezed into the caps prior to the caps enclosure.

Variances are to be expected between capsules but ideally kept within a tight of margin as possible. In fact, even in pharmaceutical applications there is regulatory allowance with an acceptable range set within ±5% of the active ingredient.

This also isn't an automated process - we use manual capping machines, Here's what the process looks like if you're not familiar: Capping Process Demonstration

Using a 400 or 600 board and pumping out 10s of thousands - if not 100,000+ caps - per sitting is a labour intensive and tedious task as you can imagine, especially when working with smaller caps (we use size 5 as standard, but size 4 for some of the higher dose offerings or raws which are a little harder to work with, for example we stick with the size 4s for the Anadrol (which tested well in our recent HPLC results)).

One thing to note that this is simply 3 randomly selected caps in packs of 100. One cap that didn't get filled quite enough can bring the overall average down. Also a difference in 1mg in a 10mg cap produces a 10% variance which appears more extreme than it actually is when broken down into a %. To put this further into perspective, 10mg is 1/500th of a teaspoon - 1mg is 1/5000th of a teaspoon. Variances are naturally going to occur at this scale.

It'd be interesting to see the statistics of testing an entire 100 pack and see how big of a variance there is between the entire 100 - that's something I'll likely do in the near future as it'd be interesting to see that data :)

But to answer your question: increased mixing time, smaller controlled batches to ensure even filler:compound distribution, and ensuring that each capsule is filled to capacity prior to enclosure would yield improvements. Overdosing may also be necessary too if raw purity isn't where it needs to be but would require the raws to be independently tested prior to batches being made too.

AJ
Click to expand...
good info brother
i find only the good companies put this out
@UGL OZ #1
 
Hey all,

Please see the results of our latest batch of Janoshik test results below (reports prepared: September 29 2025):

PEPTIDES:
Previous Janoshik results posted:
As always, all feedback is welcome and encouraged so feel free to drop a post in this thread or shoot us an email: [email protected]

AJ
 
Hey all,

Just a reminder that this weekend is a long weekend - all orders placed by 2pm today (Friday, October 3) were sent out as normal however all orders that are placed over the long weekend will not be sent out until Tuesday, October 7th as Monday is a public holiday and AusPost will not be operating over this period.

Please be mindful of any postal delays and to allow an extra couple of days as a result of this public holiday / long weekend.

Also, a quick side note that Sparta Anavar is currently out of stock however the latest batch is in the process of being prepped and we will have it restocked by the end of day Tuesday once we are back at the office. If you'd like to receive an email once Sparta Anavar is available again, simply subscribe to the stock notification mailing list and you'll receive an automated email once it is back in stock:

https://ugloz.is/product/sparta-anavar-10mg-x-100-units/

Have a great long weekend and stay safe!

AJ
 
You must log in or register to reply here.
Similar threads
Thread starter Title Forum Replies Date
UGL OZ [UGL OZ] Father's Day Flash Sale - 12 hours only - 6am-6pm (AEST) Aussie Approved Vendors 3
UGL OZ Diamond Supplier [UGL OZ] AJ'S "NO CAP" FLASH SALE (Ends today, 2PM AEST) Aussie Approved Vendors 6
UGL OZ Diamond Supplier [UGL OZ] Back In Stock: Mast E, Mast P, Rip Blend Aussie Approved Vendors 6
G Australians? Aussie Doctor recommendations. Aussie Approved Vendors 7
R&Dpharma Australia Domestic Supply R&D Pharma Aussie Approved Vendors 22

Similar threads

Top Bottom