Approved U.S Pharmacies TD Pics!!!

[Kona]

This can happen with any gear bro and you'll see this happen from time to time.

The whole solution just needs heating up and the hormone has fallen out of suspension with its oil carrier. Bring water to a boil and shut off stove, let water cool to 'not boiling' and be really hot, put vial in with an 18g needle (or whatever lowest gauge you have) stuck into the top (just the needle) to let it aerate, let the vial sit in the almost boiling water for 5-10 minutes. Take out vial swirl and repeat if necessary.

You won't see 'crystals' that's more of a chemistry term that means it fallen out of suspension. Any high concentration steroid is prone to this, some more than others. Everyone things it's the cold and while this is the most common reason it happens there are many others ways too and it in no way has anything to do with the quality of what you have in that vial so don't throw it out.

This is your chance for a little microcosm you can do yourself of what the big labs do with larger volume.

Ok, thank you for the help! Will update with the results and also if they will make the order right with the missing product. Thanks again.

 

[Mobster]

Ok, thank you for the help! Will update with the results and also if they will make the order right with the missing product. Thanks again.

Good stuff

 

[HarleyGuy]

Ok, thank you for the help! Will update with the results and also if they will make the order right with the missing product. Thanks again.

It won't be a problem bro @US-pharmacies will take care of you.

 

[GHgut4life]

How do I go about that? Sorry, man im a little new to it.

lik this

This can happen with any gear bro and you'll see this happen from time to time.

The whole solution just needs heating up and the hormone has fallen out of suspension with its oil carrier. Bring water to a boil and shut off stove, let water cool to 'not boiling' and be really hot, put vial in with an 18g needle (or whatever lowest gauge you have) stuck into the top (just the needle) to let it aerate, let the vial sit in the almost boiling water for 5-10 minutes. Take out vial swirl and repeat if necessary.

You won't see 'crystals' that's more of a chemistry term that means it fallen out of suspension. Any high concentration steroid is prone to this, some more than others. Everyone things it's the cold and while this is the most common reason it happens there are many others ways too and it in no way has anything to do with the quality of what you have in that vial so don't throw it out.

This is your chance for a little microcosm you can do yourself of what the big labs do with larger volume.

 

[Kona]

It won't be a problem bro @US-pharmacies will take care of you.

Ok, just wanted to post an update. I tried the boiling water method exactly like you said. When it came out of the heat, the liquid was clear and I thought inwas g2g. But, as it cooled you could watch it in real time change back to the cloudy appearance. I did this multiple times with the same result.

Also, the supplier suggested I bake it at 190 for 90 minutes, which I did... and it also produced clear liquid that changed back as it cooled. The pictures I've attached are the result of the baking method and then the next morning after they had sat overnight.

The good news is, they have made it right by sending me the missing primo which came 2 days ago. A roidtest confirmed it is good. Also, they have resent the masteron which should be here any day. US Pharmacies was good communication-wise and overall I am happy with their product. I understand mistakes happen and it is all good! Thank you guys again for your help!

Any suggestions on the masteron that isn't cooperating? Toss it? Keep it? What are your thoughts?

 

[GHgut4life]

Ok, thank you for the help! Will update with the results and also if they will make the order right with the missing product. Thanks again.

waiting on results @Kona

 

[GHgut4life]

Ok, just wanted to post an update. I tried the boiling water method exactly like you said. When it came out of the heat, the liquid was clear and I thought inwas g2g. But, as it cooled you could watch it in real time change back to the cloudy appearance. I did this multiple times with the same result.

Also, the supplier suggested I bake it at 190 for 90 minutes, which I did... and it also produced clear liquid that changed back as it cooled. The pictures I've attached are the result of the baking method and then the next morning after they had sat overnight.

The good news is, they have made it right by sending me the missing primo which came 2 days ago. A roidtest confirmed it is good. Also, they have resent the masteron which should be here any day. US Pharmacies was good communication-wise and overall I am happy with their product. I understand mistakes happen and it is all good! Thank you guys again for your help!

Any suggestions on the masteron that isn't cooperating? Toss it? Keep it? What are your thoughts?

did you put a pin in the top?

and crystallization is normal btw

 

[Kona]

did you put a pin in the top?

and crystallization is normal btw

Yes, I placed a pin in the top of both vials. They both came out of the hot water clear, then as it cooled slowly changed back. Same as the oven method. Is that normal?

 

[HarleyGuy]

Ok, just wanted to post an update. I tried the boiling water method exactly like you said. When it came out of the heat, the liquid was clear and I thought inwas g2g. But, as it cooled you could watch it in real time change back to the cloudy appearance. I did this multiple times with the same result.

Also, the supplier suggested I bake it at 190 for 90 minutes, which I did... and it also produced clear liquid that changed back as it cooled. The pictures I've attached are the result of the baking method and then the next morning after they had sat overnight.

The good news is, they have made it right by sending me the missing primo which came 2 days ago. A roidtest confirmed it is good. Also, they have resent the masteron which should be here any day. US Pharmacies was good communication-wise and overall I am happy with their product. I understand mistakes happen and it is all good! Thank you guys again for your help!

Any suggestions on the masteron that isn't cooperating? Toss it? Keep it? What are your thoughts?

Great detailed explanation and great work with your experimenting with de-crystallizing bro.
The Mast (in fact all of it) is still good to go if you want to warm it up before each pin until it falls out of solution again. It would be a hassle but this way you're not tossing perfectly good gear.

Not recommended but I've even microwaved mine at 15 second intervals until it's g2g and pinned.
Important to put the 18g needle tip in the top of the vial too when you immerse it in the hot water.

As always @US-pharmacies did take care of their customer and I'm happy to read about the patience you've had with them. Good stuff bro.

 

[Kona]

Great detailed explanation and great work with your experimenting with de-crystallizing bro.
The Mast (in fact all of it) is still good to go if you want to warm it up before each pin until it falls out of solution again. It would be a hassle but this way you're not tossing perfectly good gear.

Not recommended but I've even microwaved mine at 15 second intervals until it's g2g and pinned.
Important to put the 18g needle tip in the top of the vial too when you immerse it in the hot water.

As always @US-pharmacies did take care of their customer and I'm happy to read about the patience you've had with them. Good stuff

Thanks man.. I appreciate your help! And yes, they did take care of me. They earned a repeat customer!

 

[Mobster]

Yes, I placed a pin in the top of both vials. They both came out of the hot water clear, then as it cooled slowly changed back. Same as the oven method. Is that normal?

Happens for sure